A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5910-01-536-9965
NSN 5920-00-808-6977
NSN 5996-00-946-0291
NSN 6220-01-556-9497
NSN 6620-01-599-2011
NSN 5835-01-414-3258
NSN 5996-01-359-8719
NSN 6620-00-203-9466
NSN 5935-00-053-5792
NSN 5915-01-512-1327
NSN 6110-00-820-0714
NSN 6685-01-496-8443