Four equally spaced 0.031 in. W flats opposite and parallel to each other, shim assembled by alternate indexing flats
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of iron or steel not wire nesoi
NSN 5895-01-322-5563
NSN 6240-00-287-1988
NSN 5950-01-423-1742
NSN 5985-00-615-9766
NSN 5910-00-957-6874
NSN 6610-01-200-6861
NSN 5920-01-330-7989
NSN 5915-00-185-5355
NSN 5965-01-500-7168
NSN 5999-00-726-1000
NSN 6110-00-229-9079
NSN 6135-01-551-0562