Shaftalso has an external involute spline with 14 teeth; major diameter is 3.000 max; minor diameter is 2.513.
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 5985-01-567-4815
NSN 5895-01-593-6241
NSN 5975-01-358-7916
NSN 5925-01-367-9001
NSN 5925-00-516-2449
NSN 5925-00-419-1950
NSN 5950-00-578-8981
NSN 6150-01-310-9031
NSN 5915-00-222-8186
NSN 5945-00-708-2124
NSN 5999-01-580-4861
NSN 5905-01-055-0586