Shaftalso has an external involute spline with 14 teeth; major diameter is 3.000 max; minor diameter is 2.513.
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 5905-01-025-9756
NSN 5835-01-131-2027
NSN 6150-01-305-0444
NSN 5915-01-186-0464
NSN 2925-01-411-8002
NSN 5965-01-563-3514
NSN 5905-01-364-9156
NSN 6320-01-578-6006
NSN 5930-01-232-4370
NSN 6320-01-088-1109
NSN 6620-01-161-1594
NSN 6685-01-423-1064