Shaftalso has an external involute spline with 14 teeth; major diameter is 3.000 max; minor diameter is 2.513.
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 7035-00-916-9380
NSN 7035-01-510-8787
NSN 5910-01-412-3046
NSN 6110-00-170-6520
NSN 5935-00-089-9343
NSN 5920-00-712-6893
NSN 6135-00-100-8890
NSN 5999-01-265-7037
NSN 6110-01-118-5905
NSN 5965-01-195-2168
NSN 5905-00-183-4189
NSN 5935-01-511-0106