A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Dept. of the Army 
Dept. of the Air Force 
Dept. of the Navy 
Spain 
Republic of Korea 
Portugal 
Italy 
Greece 
Turkey Classification: Washers other than lock washers, iron or steel
NSN 5985-01-513-3010
NSN 5920-01-556-6192
NSN 6620-01-349-4469
NSN 5975-01-424-3155
NSN 5935-01-163-9345
NSN 5935-00-782-4753
NSN 5999-01-649-6139
NSN 6240-01-513-9642
NSN 5960-00-436-6269
NSN 5990-01-591-8797
NSN 5965-01-037-2277
NSN 6145-01-127-1622