One corner 0.172 in. Min, 0.203 in. Max radius, center of first bolt hole located 0.300 in. From radius corner along lg dim, 0.280 in. From radius corner on w dim
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of iron or steel not wire nesoi
NSN 6145-01-391-7494
NSN 6105-01-142-6179
NSN 5915-00-789-8153
NSN 5975-00-001-8016
NSN 6610-00-885-2399
NSN 5950-01-077-0488
NSN 2925-01-424-0235
NSN 5990-01-014-1280
NSN 6620-00-481-4210
NSN 4140-01-071-6191
NSN 5835-00-928-5717
NSN 5935-01-099-4103