A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5910-01-351-4667
NSN 6620-01-517-0014
NSN 6320-01-288-4783
NSN 5925-01-246-3703
NSN 6685-01-607-6481
NSN 5910-01-360-6092
NSN 6135-00-221-4720
NSN 5999-01-487-6826
NSN 6650-01-590-3670
NSN 6105-01-578-4144
NSN 4140-01-221-6863
NSN 6110-00-246-2671