A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5950-00-588-9639
NSN 5930-00-240-4247
NSN 6150-00-999-1981
NSN 5855-00-631-4565
NSN 5996-00-467-4196
NSN 6110-00-391-8932
NSN 2925-00-585-9861
NSN 5945-01-363-3258
NSN 5935-00-902-5558
NSN 5999-01-484-8054
NSN 5920-01-302-8242
NSN 5905-01-411-8084