A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6645-00-262-7448
NSN 6135-00-840-6451
NSN 5965-00-076-9561
NSN 6240-01-034-9457
NSN 5998-01-381-8710
NSN 5925-01-645-6200
NSN 5945-01-646-3819
NSN 6130-01-104-4371
NSN 6320-01-397-0399
NSN 5920-01-051-8086
NSN 6610-01-541-5034
NSN 6240-01-333-1996