A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5925-01-367-9849
NSN 5920-01-379-7475
NSN 6220-01-239-0559
NSN 2925-01-547-4565
NSN 6150-01-112-0227
NSN 6650-01-260-7427
NSN 5960-01-287-4187
NSN 5835-00-198-4936
NSN 5999-01-013-9236
NSN 5975-01-056-4727
NSN 6320-01-652-3806
NSN 5945-00-280-1567