One mounting hole on one hinge leaf 9/16 in. Dia, located in center 2 in. From end of hinge, 1 in. From side of hinge, two mounting holes on other leaf 7/16 in. Dia, located 2 in. From center to center, 1 in. In from edge of hinge and 3/4 in. From end of hinge
A hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
NSN 5935-01-459-0895
NSN 6130-01-634-0603
NSN 6240-01-535-2078
NSN 6650-01-599-7717
NSN 5835-01-475-5714
NSN 6650-00-140-8776
NSN 5905-00-753-9731
NSN 5965-00-087-3245
NSN 5996-01-182-1125
NSN 6610-00-261-8159
NSN 6620-00-486-0472
NSN 5905-01-327-9678