A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 7035-00-349-8571
NSN 5915-00-925-0835
NSN 5920-01-426-2994
NSN 5950-01-544-9065
NSN 7035-01-555-9415
NSN 5905-01-245-5395
NSN 6685-00-726-9395
NSN 5930-01-505-0811
NSN 5990-01-595-9441
NSN 6150-01-555-4981
NSN 5975-01-084-1043
NSN 5915-01-440-8250