0.002 in thick
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
NSN 4140-01-011-5356
NSN 5925-01-050-9032
NSN 5985-01-213-8449
NSN 5960-01-457-0157
NSN 5960-00-104-5955
NSN 7035-01-143-0355
NSN 6150-01-158-3864
NSN 6685-01-586-0032
NSN 5990-00-230-8981
NSN 5950-00-079-1722
NSN 5920-01-076-4705
NSN 5960-01-385-1628