0.002 in thick
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
NSN 5915-01-485-0850
NSN 6145-01-431-2262
NSN 5935-00-342-9426
NSN 6135-01-543-4256
NSN 6220-00-741-1843
NSN 6610-00-006-1489
NSN 6150-01-013-2734
NSN 6320-01-372-8671
NSN 6145-01-656-8445
NSN 4140-00-016-2615
NSN 5998-00-548-9387
NSN 6610-01-382-7894