A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Classification: Bolts and bolts and their nuts or washers exported in the same shipment
NSN 5985-01-622-6429
NSN 6150-00-291-1868
NSN 6130-01-614-6717
NSN 6145-01-313-4323
NSN 5996-01-067-4952
NSN 5895-00-489-4659
NSN 5910-01-616-0984
NSN 5935-01-076-0929
NSN 2925-01-239-6044
NSN 6620-01-012-2852
NSN 5998-00-444-7815
NSN 5965-01-025-5129