An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Classification: Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)
NSN 5998-01-373-7933
NSN 6610-01-117-5000
NSN 6135-00-577-8429
NSN 6105-01-023-7145
NSN 5950-01-170-8108
NSN 5950-01-557-4828
NSN 5935-01-089-0540
NSN 5895-01-455-8045
NSN 5998-00-405-1137
NSN 6620-01-583-1058
NSN 5935-01-028-0278
NSN 5975-01-117-7324