A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6220-01-343-1584
NSN 6150-01-154-7733
NSN 6110-01-139-4127
NSN 2925-01-617-3622
NSN 6685-01-460-8196
NSN 6135-01-648-4875
NSN 5985-01-604-2342
NSN 6610-00-186-9180
NSN 5990-01-434-7503
NSN 6685-00-600-3808
NSN 5855-00-256-5562
NSN 5925-01-462-0068