A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6135-01-036-0432
NSN 5950-00-233-7651
NSN 5905-00-197-1117
NSN 6135-01-442-4581
NSN 5960-01-024-4443
NSN 5960-01-418-2641
NSN 5990-01-326-2677
NSN 6240-00-008-5263
NSN 5915-01-121-9096
NSN 5930-01-644-0321
NSN 5925-01-303-6057
NSN 6220-01-190-6906