Multimodefiberoptic/thin coax 10mb media converter designed to join legacy thinnet segments to a fiber-optic link, perhaps remotely or attaching newly installed fiber optic backbone, st connectors on the fiber side and a bnc connector on the thin coax side which accepts any standard "t" connector to join segments; output minus 12.5 v to min 16.0 dbm into 62.5u core cable; link 1.0mhz crystal controlled; input sensitivity minus 12.0 to min 30.0 dbm average; 100ma typicalfiber side: bnc side output dc current level txo typical 41- 45 max ma; squelch threshol (t+ to txo) -225 typical -300 max mv; startup delay (tx+ to txo) typical 1 bits; propagation delay (tx+ to txo) typical 25 50max ns; fiber link, transmit, receiver, collision, jabber: utp receiver, jabber, transmit, collision; meets both 10 base-fl and foirl specs; typically used with 62.5um multimode fiber will also work with 100 and 50 um;
A receiver used for reception of light signals transmitted through an optical conductor. It converts the input to an electronic output signal. Excludes devices that would receive light signals thru a media other than fiber optic conductor such as receiver, infrared.
Classification: Optical devices, appliances and instruments, nesoi
NSN 5930-01-132-9081
NSN 5935-01-462-0745
NSN 5920-00-198-4337
NSN 6620-01-121-4019
NSN 6610-01-571-3422
NSN 5925-01-308-0669
NSN 5985-01-168-3405
NSN 6145-01-316-5357
NSN 6320-01-138-0442
NSN 5930-01-146-3651
NSN 5950-01-278-9057
NSN 5998-01-653-8589