Both ends internal teeth; both 0.032 in. By 45 degrees seat; slot on either side of bdy, 0.375 by 1.674; first end has ridge 0.28 by 1.622 dm
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.O25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see gearshaft (as modified). For items designed to support rotating members see axle(1), straight. For items not having the above conditions see pin, straight, headless. For items having machined ends which constitute steps see shaft(1), shouldered; axle(1), shouldered; and bolt, fluid passage.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 5960-01-649-1341
NSN 5855-00-327-2112
NSN 5855-01-587-7608
NSN 5855-01-141-8227
NSN 5998-01-618-0569
NSN 6685-01-453-9327
NSN 5998-01-534-4240
NSN 5915-01-437-2962
NSN 5915-01-160-2397
NSN 6320-00-586-5641
NSN 5910-01-545-0280
NSN 6240-00-038-7540