A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Greece Classification: Gaskets, washers and other seals, of vulcanized rubber other than hard rubber
NSN 6240-01-134-4944
NSN 5935-01-364-0987
NSN 6240-01-645-4797
NSN 5985-01-233-8600
NSN 6650-01-096-6803
NSN 5965-01-191-0735
NSN 2925-00-257-2872
NSN 5990-00-394-3987
NSN 6130-01-131-1567
NSN 6240-01-373-9423
NSN 5985-01-539-9175
NSN 5910-01-215-0820