Both hubs 0.438 in. Od, both hubs have four 0.1308-32 threaded securing holes located 0.094 from hub end 90 degrees apart
A flexible connection designed for nonvehicular applications which permits rotary motion to be transmitted between two shafts located at an angle to each other. The angle between the shafts may be continually varied within certain limits; the connecting ends must have either a flange, hub, or splined stub shaft; the plain portion of a splined stub shaft must not exceed the length of the splines. Excludes drive or propeller shafts with joint(s) at one or both ends. See universal joint,geared.
Classification: Clutches and universal joints
NSN 5855-00-832-9341
NSN 5990-01-003-2627
NSN 5990-00-212-4316
NSN 6610-01-215-8489
NSN 6130-00-210-4195
NSN 6320-01-087-7961
NSN 6145-01-541-6337
NSN 6150-01-422-4208
NSN 6320-01-652-3806
NSN 5975-00-932-5591
NSN 5950-01-334-5695
NSN 2925-00-305-8030