Corrosion resistant steelcomp 1018 or 1020; bar 16.750 in.L by 1.500 in.W w/2.000 in.Dia by 0.625 in.Thk welded 1.187 in. On center from one end; other end edge chamfered 0.062 in.X 45 deg, 12.000 in.Lg; 0.9381 in.Dia hole through both bars w/keyway 0.111 in.W by 0.250 in.D. Centered on axis of bar; 10-32 unf-3b hole 45 degrees from keyway; ident no. Stamped on; painted all over except chamfered end and inside attachment holes
A rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of connecting link, rigid; wire rope assembly, single leg; and clevis, rod end; etc.. Excludes arm (as modified); lever, remote control; and bell crank.
NSN 5998-01-432-0101
NSN 5930-01-540-6057
NSN 6620-01-532-9023
NSN 5985-01-136-4577
NSN 6610-00-826-7235
NSN 5835-00-537-7780
NSN 5998-00-892-1988
NSN 5905-01-181-5745
NSN 6145-01-016-0759
NSN 5930-00-306-1034
NSN 5915-01-393-7938
NSN 5996-01-457-9158