Corrosion resistant steelcomp 1018 or 1020; bar 16.750 in.L by 1.500 in.W w/2.000 in.Dia by 0.625 in.Thk welded 1.187 in. On center from one end; other end edge chamfered 0.062 in.X 45 deg, 12.000 in.Lg; 0.9381 in.Dia hole through both bars w/keyway 0.111 in.W by 0.250 in.D. Centered on axis of bar; 10-32 unf-3b hole 45 degrees from keyway; ident no. Stamped on; painted all over except chamfered end and inside attachment holes
A rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of connecting link, rigid; wire rope assembly, single leg; and clevis, rod end; etc.. Excludes arm (as modified); lever, remote control; and bell crank.
NSN 5945-00-296-8464
NSN 6645-00-954-2822
NSN 6610-00-476-4402
NSN 5895-01-535-1003
NSN 6650-00-249-5553
NSN 7035-01-522-5597
NSN 5855-00-763-2155
NSN 5990-00-257-2637
NSN 5855-01-576-2600
NSN 5910-01-189-0731
NSN 5990-00-754-2842
NSN 5996-01-312-7570