Corrosion resistant steelcomp 1018 or 1020; bar 16.750 in.L by 1.500 in.W w/2.000 in.Dia by 0.625 in.Thk welded 1.187 in. On center from one end; other end edge chamfered 0.062 in.X 45 deg, 12.000 in.Lg; 0.9381 in.Dia hole through both bars w/keyway 0.111 in.W by 0.250 in.D. Centered on axis of bar; 10-32 unf-3b hole 45 degrees from keyway; ident no. Stamped on; painted all over except chamfered end and inside attachment holes
A rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of connecting link, rigid; wire rope assembly, single leg; and clevis, rod end; etc.. Excludes arm (as modified); lever, remote control; and bell crank.
NSN 5999-00-222-4808
NSN 5998-01-204-1777
NSN 5835-01-623-3328
NSN 6150-00-819-4472
NSN 6610-01-261-1781
NSN 5905-01-539-9575
NSN 6150-00-259-1897
NSN 6110-01-015-9433
NSN 5998-01-012-3273
NSN 5960-01-430-3911
NSN 6220-00-553-8938
NSN 5905-00-139-2620