A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6145-00-365-0121
NSN 5935-01-361-9200
NSN 6145-01-267-2150
NSN 5935-00-494-0702
NSN 6145-01-049-9292
NSN 5930-00-622-6262
NSN 6320-01-422-0765
NSN 6150-01-072-2275
NSN 6220-01-020-8703
NSN 6145-01-634-0388
NSN 5990-00-873-3079
NSN 5930-01-324-6995