A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Parts of armored fighting vehicles,motorized, whether or not fitted with weapons
NSN 2925-01-097-0903
NSN 5915-01-177-0320
NSN 5999-00-113-5330
NSN 5998-01-153-2689
NSN 6220-01-026-2424
NSN 6110-01-472-1963
NSN 6220-01-500-0740
NSN 6145-01-120-8621
NSN 6105-01-096-7544
NSN 5835-01-512-4834
NSN 4140-01-068-8513
NSN 5910-01-503-7772