A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets, washers and other seals, of vulcanized rubber other than hard rubber
NSN 5975-01-065-8833
NSN 6645-00-498-6869
NSN 5855-00-237-4088
NSN 5996-01-200-5493
NSN 5945-00-161-5109
NSN 2925-00-017-9807
NSN 5855-01-167-2162
NSN 5960-00-270-3326
NSN 5975-00-660-3589
NSN 5960-01-609-6565
NSN 5855-00-631-4565
NSN 5855-01-565-5030