A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Dept. of the Navy 
Italy 
Turkey Classification: Gaskets, washers and other seals, of vulcanized rubber other than hard rubber
NSN 6110-01-371-3049
NSN 5920-01-422-0177
NSN 5930-01-371-2248
NSN 6610-00-556-1870
NSN 6220-00-594-8817
NSN 6110-01-164-3339
NSN 6645-01-291-8352
NSN 5915-01-021-9441
NSN 6610-00-176-5486
NSN 5905-01-047-7796
NSN 5920-01-287-7541
NSN 5990-01-336-3976