A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Dept. of the Army 
Dept. of the Air Force 
U.s. Marine Corps 
Dept. of the Navy 
U.s. Coast Guard 
Finland 
Lithuania 
Slovenia 
Poland 
Romania 
Bulgaria 
Czech Republic 
Brazil 
Spain 
Columbia 
Singapore 
Malaysia 
Australia 
Belgium 
Canada 
New Zealand 
France 
Germany 
Republic of Korea 
United Kingdom 
Netherlands 
Portugal 
Italy 
Denmark 
Norway 
Greece 
Turkey 
NATO Maintenance and Supply Agency Classification: Washers other than lock washers, iron or steel
NSN 5945-01-542-0840
NSN 6110-00-553-8816
NSN 5985-01-127-7716
NSN 5990-01-055-1523
NSN 5920-01-110-3177
NSN 6220-00-707-5044
NSN 5925-00-761-0105
NSN 5996-01-331-1432
NSN 5930-00-084-4309
NSN 5855-01-256-2551
NSN 5965-01-099-2989
NSN 5975-01-137-8490