A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Classification: Other wrought titanium, nesoi
NSN 5935-01-595-2362
NSN 6135-01-438-0228
NSN 5960-01-350-4288
NSN 6135-01-368-2785
NSN 6685-00-599-8407
NSN 6150-00-842-6305
NSN 5910-01-524-4154
NSN 6135-01-566-1034
NSN 6620-01-362-5432
NSN 5985-01-459-5409
NSN 5990-01-321-2997
NSN 4140-01-577-2737