A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes gasket; insulator (as modified) and mounting pad, electrical-electronic component.
Classification: Parts of armored fighting vehicles,motorized, whether or not fitted with weapons
NSN 6135-01-558-4194
NSN 6110-00-910-6537
NSN 6145-00-663-6133
NSN 5920-00-715-2541
NSN 5990-01-240-7288
NSN 5975-01-549-6316
NSN 5950-00-532-1391
NSN 5895-01-552-5884
NSN 5985-00-252-5567
NSN 5835-00-892-3510
NSN 5990-00-285-1948
NSN 5925-01-515-1378