1st end has 2 keyways cut 180 degrees apart, 0.093 in.Wide by 0.052 in.Dp by 0.875 in.Lg
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 5925-01-525-7694
NSN 5990-01-537-1553
NSN 5975-01-473-6033
NSN 5990-00-513-5328
NSN 2925-01-014-8007
NSN 5920-01-013-7831
NSN 6135-01-595-4779
NSN 5855-00-433-2377
NSN 6150-01-228-2201
NSN 6220-01-420-6512
NSN 5835-00-280-8494
NSN 5975-01-055-8957