11 gauge sheet steel-3 in long, 3 in wide-has 1 7/8 in long by 3/6 in wide center cut
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of iron or steel not wire nesoi
NSN 5985-01-499-1403
NSN 5996-01-130-5128
NSN 5835-01-632-6627
NSN 6145-01-250-6108
NSN 5915-01-426-8862
NSN 6220-01-472-7693
NSN 5999-01-185-9948
NSN 6320-00-593-0379
NSN 5950-01-520-8018
NSN 5920-01-252-8660
NSN 6650-01-075-6642
NSN 5925-00-332-0018