Three cutouts equally spaced
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of iron or steel not wire nesoi
NSN 5975-01-376-8532
NSN 5999-01-045-7221
NSN 5895-01-647-1717
NSN 5960-01-512-0233
NSN 6240-01-452-9418
NSN 6220-00-429-6652
NSN 6150-00-518-2743
NSN 5965-01-311-1376
NSN 6145-00-887-1439
NSN 6150-01-614-4535
NSN 5950-00-105-7927
NSN 5998-01-461-9472