Between intermittent duty pull solenoid; pull force: 5 lbs at .25 inches stroke with 20 vdc applied at 165 degrees f with internal spring installed; internal spring-coil unergized; spring force at gauge height: 2.15 lbs +or- .25 lbs; spring force at engergized position: 13 lbs +or- .50 lbs; operating voltage range: 20 to 30 vdc; coil resistance at 76 degrees f: 2.85 ohms and 3.15 ohms ; insulation resistance: 500 megohms at 1500 vdc coil to ground; duty (intermittent) at 165 degrees f: .5 minutes on; 3 minutes off; repeated 4 times; operating temperature range: -65 degrees f to 165 degrees f; meets mil-s-4040 requirements
1.780 inches overall length, 1.062 inches single mounting facility center to center distance between mounting facilities parallel to length
1.780 inches overall length, 1.062 inches single mounting facility center to center distance between mounting facilities parallel to length
Riveted on mounting configuration
2b single mounting facility thread class, 1.680 inches overall length, 1.680 inches overall height, 1.000 inches overall width
Steel case material, nickel case surface treated, explosion proof environmental protection, intermittent duty type, 30.0 dc voltage rating in volts
2a single mounting facility thread class, 4.250 inches overall length, 2.625 inches single mounting facility center to center distance between mounting facilities parallel to length
NSN 5910-01-361-2889
NSN 5910-00-684-8343
NSN 5975-01-101-1422
NSN 5920-00-723-4554
NSN 5975-00-004-9431
NSN 6130-01-035-3900
NSN 6240-01-459-0902
NSN 6130-00-847-1641
NSN 5945-01-065-5285
NSN 6150-01-117-4773
NSN 6150-01-004-1446
NSN 5950-00-513-9596
Last Updated: 11/24/2024