Between intermittent duty pull solenoid; pull force: 5 lbs at .25 inches stroke with 20 vdc applied at 165 degrees f with internal spring installed; internal spring-coil unergized; spring force at gauge height: 2.15 lbs +or- .25 lbs; spring force at engergized position: 13 lbs +or- .50 lbs; operating voltage range: 20 to 30 vdc; coil resistance at 76 degrees f: 2.85 ohms and 3.15 ohms ; insulation resistance: 500 megohms at 1500 vdc coil to ground; duty (intermittent) at 165 degrees f: .5 minutes on; 3 minutes off; repeated 4 times; operating temperature range: -65 degrees f to 165 degrees f; meets mil-s-4040 requirements
1.780 inches overall length, 1.062 inches single mounting facility center to center distance between mounting facilities parallel to length
1.780 inches overall length, 1.062 inches single mounting facility center to center distance between mounting facilities parallel to length
Riveted on mounting configuration
2b single mounting facility thread class, 1.680 inches overall length, 1.680 inches overall height, 1.000 inches overall width
Steel case material, nickel case surface treated, explosion proof environmental protection, intermittent duty type, 30.0 dc voltage rating in volts
2a single mounting facility thread class, 4.250 inches overall length, 2.625 inches single mounting facility center to center distance between mounting facilities parallel to length
NSN 5905-00-578-4807
NSN 6685-01-272-9247
NSN 5935-01-394-3685
NSN 5855-01-243-2355
NSN 6620-01-416-9882
NSN 6150-01-434-9024
NSN 5990-00-984-2200
NSN 4140-01-448-0733
NSN 6130-00-929-6699
NSN 6645-01-292-2873
NSN 6110-01-547-5924
NSN 6135-00-152-8729
Last Updated: 02/04/2025