Product Features
Inner shaft flatted 0.280 in. Length by 0.080 in. Height
Detail Specifications
Body Style:
Cylindrical bushing mounted
Reliability Indicator:
Not established
Body Diameter:
1.160 centimeters
Shaft Diameter:
0.250 inches
Shaft Length:
1.310 inches
Mounting Bushing Length:
0.250 inches
Body Length:
0.432 inches
Undercut Diameter:
0.125 inches
Shaft Style:
Round, stepped
Actuator Type:
Dual concentric
Effective Electrical Rotation In Deg Angular Rotation:
312.0
Maximum Starting Torque:
8.00 inch-ounces
Maximum Running Torque:
8.00 inch-ounces
Maximum Stop Torque:
192.00 inch-ounces
Nonturn Device Location:
At 9 oclock
Nonturn Device Radius:
0.531 inches
Undercut Length:
0.430 inches
Screw Thread Diameter:
0.375 inches
Screw Thread Series Designator:
Unef
Screw Thready Qty Per Inch (tpi):
32.0
Terminal Location:
Radially positioned over less than half the circumference
Mounting Method:
Standard bushing
Electrical Resistance Per Section:
10.0 percent, rated amperes c and better finish and 2.5 gallons per minute c and better industrial clears
Rotary Actuator Travel In Angular Deg:
312.0
Resistance Tempurature Characteristic Range Per Section In Percent:
+0.0/+7.0 -55 degrees celsius 1st section and +0.0/+10.0 -55 degrees celsius 2nd section and +0.0/+5.0 -25 degrees celsius 2nd section and +0.0/+3.5 -25 degrees celsius 1st section and +0.0/+2.0 0 degrees celsius 1st section and +0.0/+2.5 0 degrees celsius 2nd section and -2.5/+2.5 85 degrees celsius 1st section and -3.5/+3.5 85 degrees celsius 2nd section and +0.0/+5.5 120 degrees celsius 1st section and +0.0/+7.5 120 degrees celsius 2nd section and +0.0/+8.5 150 degrees celsius 1st section and +0.0/+12.5 150 degrees celsius 2nd section
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power:
150.0 all sections
Power Dissipation Rating Per Section In Watts:
3.0 7th secondary at 10'30 oclock
Resistance Tolerance Per Section In Percent:
-20.0/+20.0 all sections
Actuator Travel Control Feature:
Stops
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power:
70.0 all sections
Standard Taper Curve Per Section:
A 1st section and f 2nd section
Test Data Document:
97942-576r030 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity:
6 tab, solder lug
Item Name:
Potentiometer,cermet
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
