Detail Specifications
Reliability Indicator:
Not established
Terminal Length:
0.500 inches
Body Outside Diameter:
0.043 inches
Terminal Diameter:
0.004 inches
Ambient Tempurature At Full Rated Power:
25.0 degrees celsius
Maximum Operating Temp:
150.0 degrees celsius
Thermal Time Constant In Seconds:
8.0
Power Dissipation Constant In Milliwatts Per Deg Celsius:
0.35
Zero Power Tempurature Coefficient Of Resistance In Percent Per Deg Celsius:
-5.40
Tempurature Points For Resistance Readings At Zero Power:
-25.0 degrees celsius 2nd resistance-temperature point
Tempurature Points For Resistance Readings At Zero Power:
-40.0 degrees celsius 1st resistance-temperature point
Tempurature Points For Resistance Readings At Zero Power:
100.0 degrees celsius 4th resistance-temperature point
Tempurature Points For Resistance Readings At Zero Power:
200.0 degrees celsius 5th resistance-temperature point
Tempurature Points For Resistance Readings At Zero Power:
300.0 degrees celsius 6th resistance-temperature point
Tempurature Points For Resistance Readings At Zero Power:
50.0 degrees celsius 3rd resistance-temperature point
Zero Power Resistance At Specificationified Temp:
340.0 megohms 6th resistance-temperature point
Zero Power Resistance At Specificationified Temp:
7.5 kilohms 2nd resistance-temperature point
Zero Power Resistance At Specificationified Temp:
1.4 megohms 4th resistance-temperature point
Zero Power Resistance At Specificationified Temp:
115.0 megohms 5th resistance-temperature point
Zero Power Resistance At Specificationified Temp:
16.0 kilohms 3rd resistance-temperature point
Zero Power Resistance At Specificationified Temp:
850.0 ohms 1st resistance-temperature point
Resistance Tolerance At A Specificationified Tempurature In Percent:
-15.0/+15.0 all resistance-temperature points
Inclosure Type:
Encapsulated
Zero Power Resistance:
5.000 megohms
Zero Power Resistance Tolerance In Percent At Reference Temp:
-20.0/+20.0
Style Designator:
Sealed or coated bead
Test Data Document:
13499-714-3233-170 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity:
2 wire lead
Item Name:
Resistor,thermally Sensitive
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
