Description
2a single mounting facility thread class, 0.440 inches single mounting facility thread length, 2.940 inches overall length, 0.370 inches single actuator first flat length.
Technical Specifications of NSN
Thread Class:
2a single mounting facility
Thread Length:
0.440 inches single mounting facility
Overall Length:
2.940 inches
First Flat Length:
0.370 inches single actuator
Flat Height:
0.210 inches single actuator
Shaft Diameter:
0.248 inches single actuator and 0.252 inches single actuator
Shaft Length:
0.940 inches single actuator
Overall Diameter:
1.040 inches
Nonturn Device Radius:
0.432 inches at 3: 00 o'clock
Individual Section Quantity:
3
Nonturn Device Type:
Tab at 3: 00 o'clock
Operating Tempurature Range:
-55.0/+125.0 degrees celsius
Switch Contact Basic Design:
Nonpile-up symmetrical
Pole Quantity:
1 each section front
Throw Quantity:
5 each section front
Mounting Method:
Threaded bushing single mounting facility
Thread Size:
0.375 inches single mounting facility
Contact Voltage Rating In Volts:
115.0 ac at sea level
Contact Voltage Rating In Volts:
28.0 dc at sea level
Switch Actuator Momentary Position:
Clockwise single actuator and counterclockwise single actuator
Shaft Flat/slot Angular Location:
255.0 degrees from nonturn device single actuator
Switch Actuator Indexing Position Quantity:
5 single actuator
Shaft Type:
Round, flatted single actuator
Terminal Type:
Tab, solder lug
Contact Switching Action:
Makes before breaks each section front
Switch Actuator Positioning Increment:
30.0 degrees single actuator
Detent Rotational Torque Range:
+2.000/+7.000 inch-pounds single actuator
Switch Actuator Stop Device Type:
Fixed stop single actuator
Contact Load Current Rating:
2.0 amperes resistive load ac at sea level
Contact Load Current Rating:
1.0 amperes resistive load dc at sea level and 500.0 milliamperes inductive load dc at sea level
Style Designator:
Tap, circular, bushing mount
Test Data Document:
06481-900027-94 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Thread Series Designator:
Unef single mounting facility
Item Name:
Switch,master Disconnect
Other Related Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
