Description
2a single mounting facility thread class, 0.440 inches single mounting facility thread length, 2.940 inches overall length, 0.370 inches single actuator first flat length.
Detail Specifications
Thread Class:
2a single mounting facility
Thread Length:
0.440 inches single mounting facility
Overall Length:
2.940 inches
First Flat Length:
0.370 inches single actuator
Flat Height:
0.210 inches single actuator
Shaft Diameter:
0.248 inches single actuator and 0.252 inches single actuator
Shaft Length:
0.940 inches single actuator
Overall Diameter:
1.040 inches
Nonturn Device Radius:
0.432 inches at 3: 00 o'clock
Individual Section Quantity:
3
Nonturn Device Type:
Tab at 3: 00 o'clock
Operating Tempurature Range:
-55.0/+125.0 degrees celsius
Switch Contact Basic Design:
Nonpile-up symmetrical
Pole Quantity:
1 each section front
Throw Quantity:
5 each section front
Mounting Method:
Threaded bushing single mounting facility
Thread Size:
0.375 inches single mounting facility
Contact Voltage Rating In Volts:
115.0 ac at sea level
Contact Voltage Rating In Volts:
28.0 dc at sea level
Switch Actuator Momentary Position:
Clockwise single actuator and counterclockwise single actuator
Shaft Flat/slot Angular Location:
255.0 degrees from nonturn device single actuator
Switch Actuator Indexing Position Quantity:
5 single actuator
Shaft Type:
Round, flatted single actuator
Terminal Type:
Tab, solder lug
Contact Switching Action:
Makes before breaks each section front
Switch Actuator Positioning Increment:
30.0 degrees single actuator
Detent Rotational Torque Range:
+2.000/+7.000 inch-pounds single actuator
Switch Actuator Stop Device Type:
Fixed stop single actuator
Contact Load Current Rating:
2.0 amperes resistive load ac at sea level
Contact Load Current Rating:
1.0 amperes resistive load dc at sea level and 500.0 milliamperes inductive load dc at sea level
Style Designator:
Tap, circular, bushing mount
Test Data Document:
06481-900027-94 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Thread Series Designator:
Unef single mounting facility
Item Name:
Voltage Selector
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
