Product Technical Spec.
Body Style:
Standard round d
Shoulder Diameter:
Between 1.9850 inches and 1.9950 inches
Pilot Diameter:
Between 0.5990 inches and 0.6000 inches
Second Shoulder Diameter:
Between 1.9985 inches and 1.9995 inches
Second Shoulder Length:
0.1700 inches
Overall Length:
4.7530 inches
Flange Diameter:
Between 2.2490 inches and 2.2500 inches
Flange Thickness:
Between 2.2490 inches and 2.2500 inches
Body Diameter:
Between 1.9985 inches and 1.9995 inches
Shaft Diameter:
0.2410 inches single shaft
Shaft Length:
0.6730 inches single shaft
Maximum Tempurature Rise:
45.0 degrees celsius
Stator Input Voltage Rating In Volts:
Between 8.0 and 24.0
Stator Input Current Rating:
60.0 milliamperes
Stator Input Electrical Power Rating:
600.0 milliwatts
Frequency In Hertz:
600.0
Rotor Dc Resistance In Ohms:
325.50
Stator Dc Resistance In Ohms:
76.70
Phase Shift Angle In Deg:
7.200 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
1.17 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
1.24
Interaxis Error Angular Range In Minutes:
-5.0/+5.0
Output Voltage Functional Error Range In Percent:
-0.2/+0.2
Actuator Friction Torque At Minus 55 Deg Celsius:
0.80 inch-ounces
Actuator Friction Torque At Plus 25 Deg Celsius:
0.40 inch-ounces
Pilot Length:
0.1090 inches
Shoulder Length:
0.2500 inches
Aft Of First Flange Diameter:
Between 1.9985 inches and 1.9995 inches
Mounting Surface To Terminal End Distance:
4.0800 inches
Shaft Thread Series Designator:
Unf single shaft
Shaft Thread Direction:
Right-hand single shaft
Shaft Thread Class:
2a single shaft
Shaft Thread Length:
0.3100 inches single shaft
Shaft Type:
Round, threaded single shaft
Transformation Ratio:
0.990 stator to rotor
Shaft Thread Size:
0.250 inches single shaft
Test Data Document:
81349-mil-r-14346 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Terminal Type And Quantity:
8 screw
Item Name:
Resolver,sine-cosine
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
