Technical Specifications of NSN
Body Material:
Steel, corrosion resisting
Body Style:
Standard round c
Shoulder Diameter:
Between 0.9995 inches and 1.0000 inches
Pilot Diameter:
Between 0.6245 inches and 0.6250 inches
Overall Length:
1.9380 inches
Flange Diameter:
Between 1.0590 inches and 1.0620 inches
Flange Thickness:
Between 0.0900 inches and 0.0960 inches
Undercut Diameter:
0.9750 inches
Undercut Width:
0.0500 inches
Shaft Diameter:
0.0900 inches single shaft
Shaft Length:
0.2500 inches single shaft
Rotor Input Voltage Rating In Volts:
26.0
Frequency In Hertz:
400.0
Rotor Input Current Rating:
Between 95.0 milliamperes and 100.0 milliamperes
Rotor Input Electrical Power Rating:
600.0 milliwatts
Zro Resistance In Ohms:
44.00
Zso Resistance In Ohms:
11.70
Zrs Resistance In Ohms:
57.00
Rotor Dc Resistance In Ohms:
18.00
Stator Dc Resistance In Ohms:
9.30
Phase Shift Angle In Deg:
4.000 input to output
Receiver Error Angular Range In Minutes:
-45.0/+45.0
Receiver Error Angular Range In Minutes:
-45.0 to 45.0
Actuator Friction Torque At Minus 55 Deg Celsius:
5000.00 millimeter-milligrams
Torque Gradient Per Angular Deg:
2000.000 millimeter-milligrams
Alignment Hole Quantity:
4
Pilot Length:
Between 0.0590 inches and 0.0650 inches
Shoulder Length:
Between 0.0590 inches and 0.0650 inches
Mounting Surface To Terminal End Distance:
1.6820 inches
Plus J Zro Reactance In Ohms:
43.00
Plus J Zso Reactance In Ohms:
40.50
Shaft Tapered End Minor Diameter:
0.1150 inches single shaft
Plus J Zrs Reactance In Ohms:
28.00
Shaft Type:
Round, tapered single shaft
Alignment Hole Depth:
0.0900 inches
Shaft Taper Angle In Deg:
2.0 single shaft
Alignment Hole Bolt Circle Diameter:
Between 0.8090 inches and 0.8150 inches
Shaft Taper Length:
0.0750 inches single shaft
Terminal Type And Quantity:
5 wire lead
Item Name:
Synchro Slave Crane
Other Related Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
