Detail Specifications
Body Material:
Steel, stainless
Body Style:
Standard round c
Shoulder Diameter:
Between 0.9995 inches and 1.0000 inches
Pilot Diameter:
Between 0.6245 inches and 0.6250 inches
Overall Length:
2.2020 inches
Flange Diameter:
Between 1.0610 inches and 1.0620 inches
Flange Thickness:
0.0930 inches
Undercut Diameter:
0.9750 inches
Undercut Width:
0.0500 inches
Shaft Diameter:
0.1230 inches single shaft and 0.1240 inches single shaft
Shaft Length:
0.5620 inches single shaft
Fragility Factor:
Moderately rugged
Rotor Input Voltage Rating In Volts:
26.0
Frequency In Hertz:
400.0
Rotor Input Current Rating:
110.0 milliamperes
Rotor Input Electrical Power Rating:
430.0 milliwatts
Zro Resistance In Ohms:
42.00
Zso Resistance In Ohms:
10.00
Zrs Resistance In Ohms:
50.00
Rotor Dc Resistance In Ohms:
20.00
Stator Dc Resistance In Ohms:
8.50
Phase Shift Angle In Deg:
3.800 input to output
Electrical Error Angular Range In Minutes:
-30.0/+30.0
Spline Tooth Quantity:
13 single shaft
Actuator Friction Torque At Minus 55 Deg Celsius:
3.0 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
0.3 centimeter-grams
Torque Gradient Per Angular Deg:
2100.0 millimeter-milligrams
Alignment Hole Quantity:
4
Pilot Length:
0.0620 inches
Shoulder Length:
0.0620 inches
Mounting Surface To Terminal End Distance:
1.6400 inches
Spline Tooth Diametral Pitch:
120 single shaft
Shaft Thread Series Designator:
Unf single shaft
Shaft Thread Direction:
Right-hand single shaft
Shaft Thread Class:
2a single shaft
Shaft Thread Length:
0.1730 inches single shaft
Plus J Zro Reactance In Ohms:
270.00
Plus J Zso Reactance In Ohms:
46.00
Plus J Zrs Reactance In Ohms:
21.00
Shaft Type:
Spline w/threads single shaft
Alignment Hole Depth:
0.0500 inches
Transformation Ratio:
0.454 rotor to stator
Alignment Hole Bolt Circle Diameter:
0.8120 inches
Shaft Thread Size:
0.125 inches single shaft
Terminal Type And Quantity:
5 wire lead
Item Name:
Synchro Slave Crane
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
