Product Technical Spec.
Body Material:
Steel, corrosion resisting
Body Style:
Standard round double flange a
Shoulder Diameter:
Between 3.3290 inches and 3.3340 inches
Pilot Diameter:
1.6250 inches
Second Shoulder Diameter:
Between 3.3740 inches and 3.3750 inches
Second Shoulder Length:
0.3750 inches
Overall Length:
5.9200 inches
Flange Diameter:
Between 3.6240 inches and 3.6250 inches
Flange Thickness:
0.2500 inches
Body Diameter:
Between 3.3850 inches and 3.3900 inches
Shaft Diameter:
0.2403 inches single shaft and 0.2405 inches single shaft
Shaft Length:
0.8900 inches single shaft
Distance Between Flanges:
1.3120 inches
Maximum Tempurature Rise:
60.0 degrees celsius
Rotor Input Voltage Rating In Volts:
115.0
Frequency In Hertz:
400.0
Rotor Input Current Rating:
1.9 amperes
Rotor Input Electrical Power Rating:
20.0 watts
Zss Impedance Magnitude In Ohms:
Between 3.00 and 4.00
Zss Impedance Angle In Deg:
Between 66.00 and 70.00
Phase Shift Angle In Deg:
1.000 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
35.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
170.00
Electrical Error Angular Range In Minutes:
-8.0/+8.0
Spline Tooth Quantity:
22 single shaft
Receiver Error Angular Range In Minutes:
-36.0/+36.0
Torque Gradient Per Angular Deg:
0.900 inch-ounces
Pilot Length:
0.1600 inches
Shoulder Length:
0.6550 inches
Aft Of Second Flange Diameter:
Between 3.3740 inches and 3.3750 inches
Mounting Surface To Terminal End Distance:
4.0300 inches
Spline Tooth Diametral Pitch:
96 single shaft
Shaft Thread Series Designator:
Unf single shaft
Shaft Thread Direction:
Right-hand single shaft
Shaft Thread Class:
2a single shaft
Shaft Thread Length:
0.3870 inches single shaft
Shaft Type:
Spline w/threads single shaft
Transformation Ratio:
0.783 rotor to stator
Shaft Thread Size:
0.250 inches single shaft
Test Data Document:
81349-mil-s-20708 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Terminal Type And Quantity:
5 screw
Specification Data:
81349-mil-s-20708/70 government specification
Item Name:
Synchro,receiver-transmitter
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
