Product Technical Spec.
Body Material:
Steel, stainless
Body Style:
Standard round d
Shoulder Diameter:
Between 1.9850 inches and 1.9900 inches
Pilot Diameter:
Between 0.5900 inches and 0.6000 inches
Second Shoulder Diameter:
Between 1.9985 inches and 1.9995 inches
Second Shoulder Length:
Between 0.1680 inches and 0.1700 inches
Overall Length:
4.2940 inches
Flange Diameter:
Between 2.2490 inches and 2.2500 inches
Flange Thickness:
Between 0.2480 inches and 0.2500 inches
Body Diameter:
Between 1.9850 inches and 1.9900 inches
Shaft Diameter:
0.2402 inches single shaft and 0.2405 inches single shaft
Shaft Length:
0.7190 inches single shaft
Fragility Factor:
Moderately rugged
Maximum Tempurature Rise:
45.0 degrees celsius
Stator Input Voltage Rating In Volts:
90.0
Stator Input Current Rating:
20.0 milliamperes
Stator Input Electrical Power Rating:
500.0 milliwatts
Zro Resistance In Ohms:
1015.00
Zso Resistance In Ohms:
492.00
Zrs Resistance In Ohms:
239.00
Maximum Fundamental Null Voltage In Millivolts Per Volt:
60.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
75.00
Electrical Error Angular Range In Minutes:
-6.0/+6.0
Spline Tooth Quantity:
22 single shaft
Actuator Friction Torque At Minus 55 Deg Celsius:
0.50 inch-ounces
Actuator Friction Torque At Plus 25 Deg Celsius:
0.20 inch-ounces
Alignment Hole Quantity:
3
Pilot Length:
Between 0.0360 inches and 0.0460 inches
Shoulder Length:
0.2500 inches
Aft Of First Flange Diameter:
Between 1.9985 inches and 1.9995 inches
Mounting Surface To Terminal End Distance:
3.4450 inches
Spline Tooth Diametral Pitch:
96 single shaft
Shaft Thread Series Designator:
Unf single shaft
Shaft Thread Direction:
Right-hand single shaft
Shaft Thread Length:
0.2660 inches single shaft
Plus J Zro Reactance In Ohms:
2746.00
Plus J Zso Reactance In Ohms:
4027.00
Plus J Zrs Reactance In Ohms:
81.00
Shaft Type:
Spline w/threads single shaft
Alignment Hole Depth:
0.1250 inches
Transformation Ratio:
0.735 rotor to stator
Alignment Hole Bolt Circle Diameter:
1.6420 inches
Shaft Thread Size:
0.250 inches single shaft
Test Data Document:
81349-mil-20708 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Terminal Type And Quantity:
5 screw
Specification Data:
81349-mil-s-20708/94 government specification
Item Name:
Synchro,control Transformer
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
