Product Technical Spec.
Body Material:
Steel, corrosion resisting
Body Style:
Standard round c
Shoulder Diameter:
Between 1.3115 inches and 1.3120 inches
Pilot Diameter:
Between 0.4995 inches and 0.5000 inches
Overall Length:
2.1310 inches
Flange Diameter:
Between 1.4360 inches and 1.4370 inches
Flange Thickness:
0.0930 inches
Undercut Diameter:
1.3120 inches
Undercut Width:
0.0780 inches
Shaft Diameter:
0.1195 inches single shaft and 0.1200 inches single shaft
Shaft Length:
0.5400 inches single shaft
Fragility Factor:
Moderately rugged
Rotor Input Voltage Rating In Volts:
26.0
Frequency In Hertz:
400.0
Rotor Input Current Rating:
125.0 milliamperes
Rotor Input Electrical Power Rating:
600.0 milliwatts
Zro Resistance In Ohms:
47.00
Zso Resistance In Ohms:
10.30
Zrs Resistance In Ohms:
44.00
Zso-9 Designator Resistance In Ohms:
6.10
Rotor Dc Resistance In Ohms:
16.00
Stator Dc Resistance In Ohms:
7.00
Phase Shift Angle In Deg:
3.000 input to output
Maximum Total Null Voltage Output In Millivolts Per Volt:
25.00
Electrical Error Angular Range In Minutes:
-1.0/+1.0
Actuator Friction Torque At Minus 55 Deg Celsius:
6.0 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
2.0 centimeter-grams
Torque Gradient Per Angular Deg:
2250.0 millimeter-milligrams
Alignment Hole Quantity:
4
Pilot Length:
0.0400 inches
Shoulder Length:
0.1320 inches
Mounting Surface To Terminal End Distance:
1.5910 inches
Plus J Zro Reactance In Ohms:
260.00
Shaft Slot Depth:
0.0210 inches single shaft and 0.0310 inches single shaft
Plus J Zso Reactance In Ohms:
43.00
Shaft Slot Width:
0.0210 inches single shaft and 0.0310 inches single shaft
Plus J Zrs Reactance In Ohms:
28.00
Shaft Type:
Round, slotted single shaft
Alignment Hole Depth:
0.1120 inches
Transformation Ratio:
0.454 rotor to stator
Alignment Hole Bolt Circle Diameter:
0.8750 inches
Plus J Zso-9 Designator Reactance In Ohms:
12.50
Terminal Type And Quantity:
5 wire lead
Item Name:
Synchro Master Crane
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
