Product Features
Rear shaft dim. 0.4150 in. Nom lg, 0.1195 in. Min 0.1200 in. Max dia, 0.0210 in. Min 0.0310 in. Max w by 0.0210 in. Min 0.0310 in. Max deep slot
Detail Specifications
Body Style:
Standard round c
Shoulder Diameter:
Between 1.3115 inches and 1.3120 inches
Pilot Diameter:
Between 0.4995 inches and 0.5000 inches
Overall Length:
2.4440 inches
Flange Diameter:
Between 1.4360 inches and 1.4370 inches
Flange Thickness:
0.0930 inches
Undercut Diameter:
1.3120 inches
Undercut Width:
0.0780 inches
Shaft Diameter:
0.1195 inches single shaft and 0.1200 inches single shaft
Shaft Length:
0.4780 inches single shaft
Rotor Input Voltage Rating In Volts:
26.0
Frequency In Hertz:
400.0
Rotor Input Current Rating:
225.0 milliamperes
Rotor Input Electrical Power Rating:
1.2 watts
Zro Resistance In Ohms:
25.00
Rotor Dc Resistance In Ohms:
9.50
Stator Dc Resistance In Ohms:
3.80
Phase Shift Angle In Deg:
4.500 input to output
Electrical Error Angular Range In Minutes:
-10.0/+10.0
Actuator Friction Torque At Minus 55 Deg Celsius:
15.0 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
5.0 centimeter-grams
Torque Gradient Per Angular Deg:
3000.0 millimeter-milligrams
Alignment Hole Quantity:
4
Pilot Length:
0.0400 inches
Shoulder Length:
0.1320 inches
Mounting Surface To Terminal End Distance:
1.5510 inches
Plus J Zro Reactance In Ohms:
115.00
Shaft Slot Depth:
0.0210 inches single shaft and 0.0310 inches single shaft
Shaft Slot Width:
0.0210 inches single shaft and 0.0310 inches single shaft
Shaft Type:
Round, slotted single shaft
Alignment Hole Depth:
0.1250 inches
Transformation Ratio:
11.800 rotor to stator
Alignment Hole Bolt Circle Diameter:
0.8750 inches
Terminal Type And Quantity:
5 wire lead
Item Name:
Synchro Master Crane
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
