Product Technical Spec.
Body Style:
Standard round c
Shoulder Diameter:
Between 1.3115 inches and 1.3120 inches
Pilot Diameter:
Between 0.4995 inches and 0.5000 inches
Overall Length:
2.4440 inches
Flange Diameter:
Between 1.4360 inches and 1.4370 inches
Flange Thickness:
0.0930 inches
Undercut Diameter:
1.3120 inches
Undercut Width:
0.0780 inches
Shaft Diameter:
0.1195 inches both shafts and 0.1200 inches both shafts
Shaft Length:
0.3750 inches rear shaft
Shaft Length:
0.4780 inches front shaft
Rotor Input Voltage Rating In Volts:
26.0
Frequency In Hertz:
400.0
Rotor Input Current Rating:
220.0 milliamperes
Rotor Input Electrical Power Rating:
1.2 watts
Zro Resistance In Ohms:
19.00
Zso Resistance In Ohms:
4.70
Zrs Resistance In Ohms:
21.00
Zso-9 Designator Resistance In Ohms:
3.30
Rotor Dc Resistance In Ohms:
8.00
Stator Dc Resistance In Ohms:
3.60
Phase Shift Angle In Deg:
3.900 input to output
Maximum Total Null Voltage Output In Millivolts Per Volt:
20.00
Electrical Error Angular Range In Minutes:
-10.0/+10.0
Actuator Friction Torque At Minus 55 Deg Celsius:
30.0 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
10.0 centimeter-grams
Alignment Hole Quantity:
4
Pilot Length:
0.0400 inches
Shoulder Length:
0.1320 inches
Mounting Surface To Terminal End Distance:
1.5910 inches
Plus J Zro Reactance In Ohms:
112.00
Shaft Slot Depth:
0.0210 inches both shafts and 0.0310 inches both shafts
Plus J Zso Reactance In Ohms:
19.00
Shaft Slot Width:
0.0210 inches both shafts and 0.0310 inches both shafts
Plus J Zrs Reactance In Ohms:
13.00
Shaft Type:
Round, slotted both shafts
Alignment Hole Depth:
0.1250 inches
Alignment Hole Bolt Circle Diameter:
0.8750 inches
Plus J Zso-9 Designator Reactance In Ohms:
5.70
Terminal Type And Quantity:
5 wire lead
Item Name:
Synchro Master Crane
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
